Removing the optical-drive interposer
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
Procedure
Steps
1. Open the latch and disconnect the display cable from the system board.
2. Lift the latch and pull the optical-drive interposer cable from the system board and the optical-drive board connector.
3. Remove the screws that secure the optical-drive interposer to the palm rest and keyboard assembly.
4. Lift the optical-drive interposer off the palm rest and keyboard assembly.
1. display cable
3. latch
26
Removing the optical-drive interposer
computer. After working inside your computer, follow the instructions in
2. routing guide
4. optical-drive interposer cable
11
After working
www.dell.com/