Chapter 31: Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 15 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

Steps
1. Remove the optical drive.
2. Remove the base cover.
3. Remove the wireless card.

Procedure

Steps
1. Remove the battery cable from the system board.
2. Note the display cable routing and remove the cable from its routing guides.
3. Lift the latch and disconnect the display cable from the system board.
1. display cable
3. latch
4. Remove the screws that secure the display hinges to the palm rest and keyboard assembly.
5. Open the display hinges.
Removing the display assembly
computer. After working inside your computer, follow the instructions in
2. system board
4. routing guides
After working
www.dell.com/
Removing the display assembly
31
57