Setting The Power Grid Standard Code For An Inverter - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual

7.13 Setting the Power Grid Standard Code for an Inverter

This topic describes how to set the power grid standard code for an inverter over the WebUI.
Setting the Power Grid Standard Code
An inverter can normally generate electricity in grid-tied mode only if the power grid standard
code is set properly for it.
This parameter must be set by professional personnel. Otherwise, the equipment may be
damaged.
On the Monitoring tab page, choose the inverter for which the power grid standard code will
be set and click Grid Code, as shown in
select the User name as Special User.
Figure 7-43 Power Grid Standard Code
Properly set the power grid standard code based on the local standard.
Issue 04 (2013-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 7-43. Because of the limited permission,
7 Web User Interface
125