Preparations For Login - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
This topic describes how to set Ethernet parameters, including IP Address and DNS server
address over the WebUI.
7.23 Setting RS485 Parameters
This topic describes how to set RS485 parameters, including Baud Rate, Start Address, and
End Address, over the WebUI.
7.24 Setting EMI Parameters
This topic describes how to set parameters, including Read Function Code, Read Mode, Start
Address, and End Address, for the environmental monitoring instrument over the WebUI.
7.25 Setting NetEco Parameters
This topic describes how to set NetEco parameters, including Connect Mode, NetEco IP, and
Port, over the WebUI.
7.26 Setting FTP Parameters
This topic describes how to set basic parameters of the FTP server and view the latest report
status over the WebUI.
7.27 Setting Email Parameters
This topic describes how to set basic parameters of email and view the latest report status over
the WebUI.
7.28 Port Settings
This topic describes how to reset a 3G router by configuring a DO port or USB port.
7.29 Grid Dispatch
This topic describes the power grid dispatching function.
7.30 Upgrading Firmware
This topic describes how to upgrade firmware for the SmartLogger over the WebUI.
7.31 Viewing Product Information
This topic describes how to view SmartLogger information, including SN, Hardware Version,
Device Type, and Firmware Version, over the WebUI.
7.32 User Management
This topic describes how to change the password for the active user over the WebUI.
7.33 Exporting Fault Information
This topic describes how to export fault information over the WebUI.

7.1 Preparations for Login

This topic describes the operating environment for the WebUI and the required preparations
before you log in to the WebUI.
Issue 04 (2013-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Web User Interface
88