Setting Ethernet Parameters - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Figure 7-56 Currency parameters

7.22 Setting Ethernet Parameters

This topic describes how to set Ethernet parameters, including IP Address and DNS server
address over the WebUI.
Correctly set parameters for the Ethernet to ensure the normal communications between the
SmartLogger and the monitoring terminal.
On the Settings tab page, choose Comm. Parameters > Ethernet and set IP Address,
Subnet Mask, Default Gateway, and DNS server address, as shown in
Because of the limited permission, select the User name as Advanced User.
Issue 04 (2013-12-15)

Four values are available for Currency, that is, EUR, CNY, GBP, and USD.
 The currency factor is the electricity price per kWh, which is used to calculate the energy yield
revenue.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Web User Interface
Figure 7-57.
137