Huawei SmartLogger1000 User Manual page 88

SmartLogger1000
User Manual
LCD
Issue 04 (2013-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default page, press
main menu.
2. Select and press
3. Enter the User name and Password by
pressing or , and then press
NOTE
 Because of the limited permission, select the
User name as Advanced User or Special User.
The initial password for Advanced User and
Special User is 000001. If you forget the
password, contact Huawei technical support for a
dynamic password that is effective only on that
current day. Change the password after login.

After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit from the Maintenance
page and log in again within 30 seconds, no
authentication is required.
4. Press , select Data Clear, and press
.
NOTICE
Cleared data cannot be restored. Therefore, perform
this operation with caution.
6 User Interface
to enter the
.
.
81