Huawei SmartLogger1000 User Manual page 75

SmartLogger1000
User Manual
Context


Procedure

LCD
Issue 04 (2013-12-15)
After restoring factory settings for the SmartLogger, set the user parameters and
communications parameters in time and log in to the WebUI to set the environmental
monitoring instrument parameters and power grid dispatching parameters.
The displayed language is English by default.
The following table describes the procedure for restoring factory settings. The parameter
values in the following figures are for reference only.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default page, press
main menu.
2. Choose and press
3. Enter the User name and Password by
pressing or , and then press
NOTE
 Because of the limited permission, select the
User name as Advanced User or Special User.
The initial password for Advanced User and
Special User is 000001. If you forget the
password, contact Huawei technical support for a
dynamic password that is effective only on that
current day. Change the password after login.
 After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit from the Settings page
and log in again within 30 seconds, no
authentication is required.
6 User Interface
to enter the
.
.
68