Huawei SmartLogger1000 User Manual page 153

SmartLogger1000
User Manual
Connecting a 3G Router to the SmartLogger Over a DO Port
Before connecting a 3G router to the SmartLogger, cut off a DC power cable of the connector,
and then connect the cable cut to the DO port on the SmartLogger.


Issue 04 (2013-12-15)
Figure 7-65 shows the connection when one DO port is used.
Figure 7-65 Connecting one DO port
Figure 7-66 shows the connection when two DO ports are used.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Web User Interface
146