Huawei SmartLogger1000 User Manual page 72

SmartLogger1000
User Manual
LCD
Here use the pages displayed when you
log in to the SmartLogger as Advanced
User.
Issue 04 (2013-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default page, press
main menu.
2. Choose and press
3. Enter the User name and Password by
pressing or , and then press
NOTE
 Because of the limited permission, select the
User name as Advanced User. The initial
password for Advanced User is 000001. If you
forget the password, contact Huawei technical
support for a dynamic password that is effective
only on that current day. Change the password
after login.

After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit from the Settings page
and log in again within 30 seconds, no
authentication is required.
4. Select Comm. Param. and press
 Perform step 5 and step 6 to set the
parameters for the RS485.
 Perform step 7 and step 8 to set the
parameters for the Ethernet.
 Perform step 9 and step 10 to set the
parameters for the NetEco.
6 User Interface
to enter the
.
.
.
65