Huawei SmartLogger1000 User Manual page 70

SmartLogger1000
User Manual
LCD
Here use the pages displayed when you
log in to the SmartLogger as Advanced
User.
Issue 04 (2013-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
2. Choose and press
3. Set User Name and Password by pressing
or , and press
NOTE

User Name can be set to any of the following
values: Common User, Advanced User, and
Special User. The initial password is 000001. If
you forget the password, contact Huawei
technical support personnel for a dynamic
password that is valid only on the current day.
Change the password after login.
 After the authentication is successful, the system
keeps the authentication information for 30
seconds. If you exit from the Settings screen and
log in again within 30 seconds, no authentication
is required.
4. Select User Password by pressing
press .
NOTICE
The password on the LCD is the same as that on the
WebUI. After you change a password on the LCD,
the password on the WebUI changes synchronously.
5. Enter the old password and press
Increase or decrease the value by pressing
or . Switch between data bits by pressing
.
6 User Interface
.
.
, and
.
63