Applicable Standards / Regulations - Panasonic SF4D Series Instruction Manual

1-2 Applicable Standards / Regulations

This device complies with the following standards and regulations.
<EU Directives>
EU Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
<European Standards>
EN 61496-1/2 (Type 4), EN 55011, EN 61000-6-2, EN 50178
EN ISO 13849-1: 2015 (Category 4, PLe)
<International Standards>
IEC 61496-1/2 (Type 4), ISO 13849-1: 2015 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
<Japanese Industrial Standards (JIS)>
JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)
<Standards in US / Canada>
ANSI/UL 61496-1/2 (Type 4)
CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2
<Regulations in US>
OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
For Machinery Directive, type certification a Notified Body TÜV SÜD has been acquired.
For the standards in US / Canada,
quired.
<Standards in China>
GB 4584
<Standards in Korea>
S1-G-1-2009, S2-W-5-2009
The S-mark certification certified by Korea Occupational Safety & Health Agency (KOSHA) has
been acquired.
<Reference>
The conformance of this device to JIS, OSHA and ANSI is based on our self-evaluation.
The TÜV mark
C US
the US and CSA certification in Canada.
The mark shown on the product indicates that this device has acquired the S-mark.
● Since this device has not received "Type Examination" in Article 44-2 of the Industrial Safety and
Health Act, it cannot be used in Japan as the "Safety device for press machine and shearing
machine" specified in Article 42 of the said law.
● Before using this device in a target region other than the above, be sure to confirm the stan-
dards / regulations applied in the relevant nation and region.
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
TÜV
C
indicates that this device conforms to the NRTL certification (such as UL) in
mark by a Notified Body TÜV SÜD has been ac-
US
WARNING
Introduction
11