Panasonic SF4D Series Instruction Manual page 35

Step 5 Tighten the hexagon-socket head bolt (M5, silver) for beam adjustment.
Tighten to a torque of 2N·m or less.
Step 6 Fully tighten the two hexagon-socket head bolts [M5] or the two hex bolts [M6] you
partially tightened in step 1.
<Removing the product>
Step 1 While holding the product, partially loosen the hex-socket head bolt (M5, black) for light
curtain fastening.
If you loosen the hex-socket head bolt (M5, black) for light curtain fastening without holding the
product, there is a risk that the product will fall and cause injury or product damage.
Step 2 While pushing the product against the hexagon-socket head bolt side, remove the no
dead-space beam adjustment mounting bracket.
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
This device
This device
Hexagon-socket head bolt
This device
No dead-space beam adjustment
mounting bracket
Hexagon-socket head bolt (M5,
silver) for beam adjustment
Hexagon-socket head bolt
for light curtain fastening
(M5, black)
CAUTION
Mounting
35