Panasonic SF4D Series Instruction Manual page 114

Functions
Remove the indicator cover from the device to access the DIP switches.
Indicator cover
M2.6 screw (length 7mm)
● After setting the DIP switches, always reattach the indicator cover on the device.
Tighten to a torque of 0.3N·m or less.
● There is packing on the indicator cover. If the packing is not fitted on the cover properly, fit as
shown below before attaching to the device.
Indicators on emitter side
Upper application indicator
(Blue / Red / Green / Orange)
Lower application indicator
(Blue / Red / Green / Orange)
114
Device
CAUTION
Light emission inten-
sity control indicator
(Orange)
Frequency indicator
(Orange)
Indicators on receiver side
Upper application indicator
(Blue / Red / Green / Orange)
Lower application indicator
(Blue / Red / Green / Orange)
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
<DIP switches>
ON OFF
4
3
2
1
Frequency
indicator
(Orange)