Panasonic SF4D Series Instruction Manual page 149

● Extension cable with connectors on both ends: 1 pc.
Type
For emitter
5-core
For receiver
For emitter
8-core
For receiver
For emitter
12-core
For receiver
● Cable for series connection: 2pcs./set
Model No.
SFD-CSL005
SFD-CSL01
SFD-CSL05
SFD-CSL1
SFD-CSL5
SFD-CSL10
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
Model No.
SFD-CCJ10E-S
SFD-CCJ10D-S
SFB-CCJ3E
SFB-CCJ10E
SFB-CCJ3D
SFB-CCJ10D
SFB-CCJ3E-MU
SFB-CCJ10E-MU
SFB-CCJ3D-MU
SFB-CCJ10D-MU
Length
0.05m
0.1m
Use to connect the device in series.
0.5m
If this device is to be installed in an L-shaped layout configuration, we recom-
mend that an at least 0.1m long series connection cable be used.
1m
Common for emitter / receiver
5m
10m
Length
Use to extend a 5-core cable.
10m
Both ends of the cable are connectors.
For emitter: Gray connector, 5-core shielded cable
10m
For receiver: Black connector, 5-core shielded cable
3m
Use to extend an 8-core cable.
10m
Both ends of the cable are connectors.
For emitter: Gray connector, 8-core shielded cable
3m
For receiver: Black connector, 8-core shielded cable
10m
3m
Use to extend an 12-core cable.
10m
Both ends of the cable are connectors.
For emitter: Gray connector, 12-core shielded cable
3m
For receiver: Black connector, 12-core shielded cable
10m
Remarks
Options
Remarks
149