Using Sf4B-G Compatible Mounting Bracket Ms-Sfd-4Bg (Option) ·36; Ms-Sfd-4Bg (Option) - Panasonic SF4D Series Instruction Manual

Mounting
2-4-1-4 Using SF4B-G Compatible Mounting Bracket MS-SFD-4BG (Option)
Step 1 Insert the mounting plate of the base bracket into the base bracket mounting rail of the
back of the device.
Step 2 With the base bracket in firm contact with the device, tighten the two ultra low-head hex
socket bolts [M5 (length 5mm), opposing faces 3mm] that fasten the base bracket.
Tighten to a torque of 3N·m or less.
No gap between base
bracket and device.
<Side mounting>
Loosen the two hexagon-socket head bolts with washers [M4 (length 8mm), opposing
faces 3mm] and remove the bracket.
Change the orientation of the mounting bracket, and tighten the two hexagon-socket head bolts
with washers [M4 (length 8mm), opposing faces 3mm]. Tighten to a torque of 1.5N·m or less.
36
Mounting plate
Base bracket
Base bracket mounting rail
This device
Ultra low-head hex socket bolt for base
bracket
[M5 (length 5mm), opposing faces 3mm]
Hexagon-socket head bolt with washer
[M4 (length 8mm), opposing faces 3mm]
(Included with MS-SFD-4BG)
Mounting bracket
Base bracket
© Panasonic Industrial Devices SUNX Co., Ltd. 2017