Using Intermediate Supporting Bracket Ms-Sfb-2 (Option) ·31 - Panasonic SF4D Series Instruction Manual

2-4-1-2 Using Intermediate Supporting Bracket MS-SFB-2 (Option)
Step 1 Loosen the hexagon-socket head bolt [M4 (length 12mm), opposing faces 3mm] on the
intermediate supporting bracket.
Step 2 Fit the intermediate supporting bracket onto the side of the device, and fasten with the
hexagon-socket head bolt [M4 (length 12mm), opposing faces 3mm].
Tighten to a torque of 1.2N·m or less.
For the mounting position of the intermediate supporting bracket, refer to "6-3 Dimen-
sions".
<Side mounting>
Slide and remove the fixing fitting of the intermediate supporting bracket from the base
bracket. Change the direction of the fixing fitting, and engage the notches on the fixing
fitting with the rails on the base bracket.
© Panasonic Industrial Devices SUNX Co., Ltd. 2017
Hex socket cap bolt
[M4 (length 12mm), opposing faces 3mm]
This device
Notch on fixing fitting
Notch on fixing fitting
Mounting
31