Sharp PN-L803C Service Manual page 117

9 Size
10 Color Mode
11 Bright
12 Volume
13 Input Signal
14 Status
15 Status Code
PN-L803C/80TC3 SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 51
Screen size
Described contents are the following six kinds of contents.
・Wide
・Zoom1
・Zoom2
・Normal
・DotbyDot
Color mode
Described contents are the following four kinds of contents.
・Standard
・Vivid
・sRGB
・High Illuminance
Brightness
Setting value from 0 to 31 is described.
Volume
Setting value from 0 to 31 is described.
Input signal
・1280 x 1024
・1080p 60Hz
etc
When there is no input signal, "space" is described.
Hardware error status
When there is no hardware error, OK is described. When there is hardware error, NG is described.
Describe the current hardware state and error records as the code.
When there is no hardware error, this is described as "0000 - 0000 - 0000 – 0000".
When there is some hardware error, the following codes are described.
A. hardware observation result
The hardware error parts are divided by the bit as the following table shown ad described I n the hex.
Bit
0 SYSTEM POWER1
1 SYSTEM POWER2
2 SYSTEM POWER3
3 SYSTEM POWER4
4 SYSTEM POWER5
5 BACKLIGHT
6 TOUCH PANEL
7 - 10 Reserved
11 Low voltage abnormality
12 - 13 Reserved
14 Temperature sensor abnormality
15 Temperature abnormality
Example
Bit 15 bit 0