Sharp PN-L803C Service Manual page 165

3) Open the 13 clamps (Black) and remove the LCD Module harness, the Power-Main harness and the
Speaker harness from them as shown in the following figure. Then, remove all clamps.
Power-Main harness
Speaker harness
4) Open the two clamps (White) and remove the LCD Module harness from them as shown in the
following figure. Then, remove all clamps.
LCD Module
harness
LCD Module
harness
PN-L803C/80TC3 DISASSEMBLY AND ASSEMBLY 6 - 21
Power-Main harness
Speaker harness