Sharp PN-L803C Service Manual page 27

Signal type
Other
PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 5
Name
Touch pen adapter port
USB 1 (type B) port
USB 2 (type B) port
RS-232C input terminal
LAN terminal
USB cable
- Connect the touch pen adapter in order to use the touch pen.
- To use the touch panel with the computer connected to the
bottom, connect the touch panel to the computer with the USB
cable. (Factory setting. Can be changed in TOUCH INPUT
SELECT on the SETUP menu.)
- To use the touch panel with the computer connected to the side,
connect to the computer with the USB cable. (Factory setting.
Can be changed in TOUCH INPUT SELECT in the SETUP
menu.)
- The monitor can be connected to a PC using the RS- 232C
conversion cable (supplied) and a commercially available
RS-232 straight cable to control the monitor from the PC.
- You can control the monitor from a computer on a network by
connecting a commercially available LAN cable between this
terminal and a network.
- To use the USB port on the fornt of the tray (for USB device)
(USB 2.0 compliant), connect the USB cable to the USB port on
the computer.
* The touch panel must be connected separately.
Contents