Sharp PN-L803C Service Manual page 9

2. SPECIFICATIONS
2 – 1.PRODUCT SPECIFICATIONS
Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Viewing angle
Screen active area inch (mm)
Computer input signal
Sync signal
Video color system
Plug and play
Power management
Input terminals
Output terminals
LAN terminal
Speaker output (internal/external)
Touch Panel
Touch pen
Power requirement
Operating temperature *2*3
Operating humidity*3
Power consumption
(Maximum / input signal waiting mode *4 / whiteboard standby mode / standby mode *5)
Dimensions (excluding protrusions)
Weight
*1 D-sub input terminal only.
*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are
satisfied.
*4 When CONNECT AUTO INPUT SELECT and NO SIGNAL AUTO INPUT SEL. are set to OFF.
*5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
(pixels)
inch(mm)
lbs. (kg)
PN-L803C/80TC3 OUTLINE OF THE PRODUCTS
PC/AV
PC
Audio
Serial (RS-232C)
Video/Audio
Audio
Detection method
PC connector
Touch pen adapter port
PN-L803C/80TC3
80" Class [80 inch (203.2cm) diagonal] TFT LCD
1920 x 1080
Approx. 1.06 billion colors
0.923 mm (H) × 0.923 mm (V)
176° right/left/up/down (contrast ratio ≥ 10)
69-3/4 (W) x 39-1/4 (H) (1771.2 x 996.3)
Analog RGB (0.7 Vp-p) [75 Ω], DisplayPort 1.1a
Horizontal/vertical separate (TTL: positive/negative),
Sync-on-green*1, Composite sync (TTL:
positive/negative)*1
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
VESA DDC2B
VESA DzPMS
HDMI x 3
Mini D-sub 15 pin, 3 rows x 2, DisplayPort x 1
3.5 mm mini stereo jack x 2
3.5 mm mini jack x 1
DisplayPort x 1
3.5 mm mini stereo jack x 1
10 BASE-T/100 BASE-TX
10 W + 10 W/10 W + 10 W 6 Ω
Capacitive type
USB (2.0 compliant) (Type B) x 2
Wireless communication method (2.4 GHz, IEEE 802.15.4
compliant, DS-SS method)
USB (2.0 compliant) (Type A)
AC 100 V - 240 V, 2.6 A, 50/60 Hz
41°F to 95°F (5°C to 35°C)
20% to 80% (no condensation)
280 W / 6.0 W / 3.5 W
Approx. 72-13/16 (W) x 3-3/4 (D) x 42-3/16 (H) (1850 x 96 x
1072)
Approx. 169.8 (77)
1 - 4