Sharp PN-L803C Service Manual page 59

■ Calibration
Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched.
Adjust
Calibration can be performed manually. Click "OK" to open the settings. Follow the on-screen instructions.
Reset
The calibration settings will be deleted.
■ Properties
Settings for the touch action can be configured.
Item
Double Click Range
Setting (Mouse Mode)
Double Click Speed Setting
(Mouse Mode)
Speed Setting (Auto)
Set Manually
Test
Default
(MEMO)
- Changing this setting also changes the mouse double-click speed of Windows.
- Depending on the application software, changing the setting may not have any effect (for example, if the setting is set separately in the
application).
PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 37
Set how much the position can shift between the first touch and the second touch and still be
recognized as a double-click.
To return the setting to the default setting, click "Default".
(MEMO)
- Changing this setting also changes the effective double-click range when the mouse is used.
Set the time that is recognized as a double-click. When a second touch occurs within the set
time after the first touch, it is recognized as a double-click.
The inside of the frame can be touched twice (double-clicked) to set the speed automatically
based on the interval between the touches.
The speed can be set manually from "Slow" (about 1 second) to "Fast" (about 0.3 seconds).
When the inside of the frame is double-clicked by touching it twice, the screen changes. If the
screen does not change, repeat the setting.
Click to restore the default setting.
Contents