Toro Reelmaster 7000-D Operator's Manual page 57

Maintenance Service
Interval
Every 400 hours
Every 500 hours
Every 800 hours
Every 1,000 hours
Every 2,000 hours
Every 6,000 hours
Before storage
Every 2 years
Maintenance Procedure
• Change the air filter. Service the air filter earlier if the service indicator shows red.
Service it more frequently in extremely dirty or dusty conditions.
• Check the fuel lines and connections for deterioration, damage, or loose connections.
• Change the fuel-water separator filter.
• Change the engine-fuel filter.
• Check for end-play in the planetary drives.
• Check the planetary-gear-drive oil level (check if you notice external leakage).
• Check the oil level of the rear axle. (Also check the oil level before you start the
engine for the first time.)
• Check the lubricant in the reduction-gear case. (Also check the lubricant before
you first start the engine.)
• Change the engine oil and filter.
• Drain and clean the fuel tank.
• Change the front planetary-gear oil or yearly, whichever comes first.
• Change the oil in the rear axle.
• Check the rear-wheel alignment.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, replace the hydraulic filters.
• If you are not using the recommended hydraulic fluid or have ever filled the reservoir
with an alternative fluid, change the hydraulic fluid.
• If you are using the recommended hydraulic fluid, replace the hydraulic filters.
• If you are using the recommended hydraulic fluid, change the hydraulic fluid.
• Disassemble, clean, and assemble the soot filter of the DPF or clean the soot
filter if engine faults
SPN
in the InfoCenter.
• Drain and clean the fuel tank.
• Replace the hydraulic hoses.
• Replace the coolant hoses.
• Flush and replace the coolant.
3251 0, 3720
FMI SPN FMI
57
0, or 3720 16 displays
SPN FMI