Yamaha SIGMA-G5SII Service Information page 187

(5) Select the axis to be taught, press the teach start button.
Note:
When the X/Y beam home position teaching is performed, make sure to perform it in the both beams. If
not, the machine might not be operated correctly after the restart.
(6) After the home position teaching, re-start the machine.
(7) Send (overwrite) the device system data saved before the operation, to the machine.
Note:
If the teaching is performed without saving the device system data before the operation, all the teaching
operation items should be performed.
Service Information
Fig.D118
SI1705004E-00=SIGMA-G5SII Service Manual
187/273
For Service Engineer