Lisa System Stop (Preparation For Installation); Lisa System Stop And Service Registration Cancellation - Yamaha SIGMA-G5SII Service Information

(3) Click " Change plan setting " in the " Balance (recommended) " item and make sure that
the displayed description is the same as follows. If not, change it.

7.1.3. LISA System Stop (Preparation for Installation)

* It should be performed when the existing LISA system is graded up.
⇒ For the LISA system software new installation, go to Item
(Version up) " .

7.1.3.1. LISA System Stop and Service Registration Cancellation

(1) Double-click the " LisaCtrl.exe (
(2) Press the [Stop] button in the " LISA System Service Control " window.
(3) Press the "Un register " button to cancel the service registration.
Note:
In the case that the LISA system is used together with ACV service system, after stopping the both
systems, cancel the service registration.
" "
The Status indication in the window will change to
" "
and Stop in this order.
" "
This Service starts up the application automatically when the PC is started
up.
The application is started up without log-on.
Service Information
"Transfer the Computer to Sleep
) " icon on the desktop window to start up.
SI1705004E-00=SIGMA-G5SII Service Manual
243/273
For Service Engineer
Mode"
↓
"Disable"
" 7.1.4 Installation
" " "
RUN , Stop Processing
"