Pcb Transfer Procedure - Yamaha SIGMA-G5SII Service Information

2.5. PCB Transfer Procedure

The PCB manual transfer procedure is described as follows.
(1) Place a PCB on input conveyor.
(2) Open the PCB Transfer window.
Click the conveyor figure directly in the "Product" window, or select "PCB XFER" in the
"Setup" window,.
(3) In the "PCB XFER" window, select the transfer location ([1] to [3]) to be designated.
Pressing the [START] button on the operation panel within 5 seconds after the location
selection, transfers the PCB to the designated position.
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
67/273
For Service Engineer