NEC SL2100 Hardware Manual page 111

ISSUE 4.0
5.3.2 Wall-Mounting the DSS Console
1. Lift the leg and lead the cable through the applicable grooves. Refer to
Wall-Mount. Lower leg to stowed position.
Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
2.
83.5 mm
(3.287")
3. Mount the DSS Console to the wall.
Wall-mounting
holes
INSTALLING THE MULTILINE TELEPHONES AND OPTIONAL TERMINALS
Leg
Figure 2-103 Cabling for Wall-Mount
Figure 2-104 Wall-Mount Screw Guide
Figure 2-105 Mounting the DSS
Figure 2-103 Cabling for
< Bottom view>
3 - 4 mm 1 - 3 mm
(0.12" - 0.16") (0.04" - 0.12")
7 - 9.5 mm
(0.28" - 0.37")
Minimum 10 mm (0.39")
SL2100
Wall side
109