NEC SL2100 Hardware Manual page 167

ISSUE 4.0
Be sure the wall material can hold the weight of the base.
1. Hold the base in its final location and mark the screw location based on the measurements shown
in Figure 2-172 Base Mounting
2. Insert the appropriate anchors for the wall material.
3. Insert the mounting screws into the anchors, leaving about 1/4 inch of space between the screw
head and the wall.
4. Connect the Ethernet cable and route the cord as shown in
Dimensions.
5. Place the base over the screw heads and slide it down into place.
6.5.3 Handset and Charger
Figure 2-175 Handset Front View
Charger Top View provides a top view of the charger.
INSTALLING WIRELESS DECT TELEPHONES
Dimensions.
Figure 2-174 Base Mounting Dimensions
provides a front view of the handset and
Figure 2-174 Base Mounting
Figure 2-176
SL2100
165