NEC SL2100 Hardware Manual page 135

ISSUE 4.0
7. Plug the AC adapter into a standard 120 Vac wall outlet.
Do not use an outlet controlled by a wall switch.
Figure 2-130 Plugging the AC Adapter into the AC Wall Outlet
6.1.6 Mounting the Base Directly to the Wall
If a standard wall plate is not available, mount the telephone directly on the wall. Before mounting the
telephone, consider the following:
• Select a location away from electrical cables, pipes, or other items behind the mounting location that
could cause a hazard when inserting screws into the wall.
• Make sure the wall material can support the weight of the base unit.
• Use #10 screws with anchoring devices suitable for the wall material where the base unit will be
placed.
To mount the telephone:
1. Insert two mounting screws 3-15/16 inches apart. Allow about 3/16 of an inch between the wall
and screw heads for mounting the telephone.
Figure 2-131 Inserting Screws into the Wall for Wall Mounting the Telephone
2. Plug in and secure the AC adapter.
3. Plug the AC adapter into the base unit.
INSTALLING WIRELESS DECT TELEPHONES
SL2100
133