NEC SL2100 Hardware Manual page 147

ISSUE 4.0
6.2.3 Troubleshooting Chart
To review common problems and possible solutions, refer to the Cordless DECT Repeater Guide DTL-
RPT-1.
6.2.4 Turning on the Verification Tone
To activate the verification tone to aid in troubleshooting installation problems, refer to the Cordless
DECT Repeater Guide DTL-RPT-1.
6.2.5 Maintenance
For user maintenance of the repeater, refer to the Cordless DECT Repeater Guide DTL-RPT-1.
6.3 Installing the DTL-RPT-2 Cordless DECT Telephone REPEATER
Do not mix DTL-RPT-1 and DTL-RPT-2 repeaters on the same Cordless DECT
Terminal (DTL-8R-1).
The DTL-RPT-2 Repeater repeater lets you extend the coverage area of your D
telephone system in all directions, including up and down. If the repeaters are installed so their
coverage area overlaps the coverage area of the base, the base can hand-off calls to the repeaters as
the user moves from one coverage area to another. When connected to the repeater, the mobile
handset operates the exact same way as it does when connected to the base, and the hand-off from
the base to the repeater can be completely invisible to the end user, even during an active call.
INSTALLING WIRELESS DECT TELEPHONES
SL2100
term
DECT Cordless
145