NEC SL2100 Hardware Manual page 164

ISSUE 4.0
3. Replace the cover and slide it up until it latches onto the handset.
6.4.9 Charging the Handset Batteries
The rechargeable battery pack must be fully charged before using the handset for the first time.
Charge the battery pack without interruption for at least 10 hours.
1. Place the handset in the charging unit.
2. Make sure the Handset Charging LED indicator lights. If the Handset Charging LED does not
come on, check to see if the AC adapter is plugged in and that the handset is making good
contact with the charging contacts on the charging unit.
The Handset Charging LED turns blue during and after charging the handset with the battery.
6.5 Installing the ML440 and AP20 Wireless DECT Telephone
This section outlines the steps for connecting and mounting the base station, charging the battery, and
powering on the handset.
The following topics are included in this section:
•
Connecting the Base Station
•
Wall Mounting the Base Station
•
Handset and Charger
INSTALLING WIRELESS DECT TELEPHONES
Figure 2-170 Replacing the Battery Cover
Figure 2-171 Handset Charging LED Indicator
SL2100
162