NEC SL2100 Hardware Manual page 192

ISSUE 4.0
1. Turn the power off, insert the Customer Data SD card into the SD Slot on CPU board.
SD slot (J12)
2. Turn the power on, enter the Program Mode then PRG90-04.
Base Service OP1 OP2
Figure 3-12 PRG90-04 Display (12TXH/24TXH-B1)
3. Dial 1 and press Hold key.
4. When the data loading is completed, the display changes to the next PRG.
Loading System Data
Figure 3-13 Next PRG Display (12TXH/24TXH-B1)
5. Remove the SD card and exit from the Program Mode.
PROGRAMMING MODE
Figure 3-11 Inserting the SD card
Program Mode
CPU board
SD card with
Customer data
90-04-01
Data Load YES:1 1
90-05- M ' tenance
Slot Control
back Select
SL2100
|01
190