Toro Greensmaster 3200 Service Manual page 167

16. Secure special screw with new washer into the hole
shown (Fig. 82 and 83).
17. Secure remaining screws with washers into control
valve. Torque all screws in a criss–cross pattern from 18
to 27 ft–lb (2.4 to 3.7 kg–m).
18. Install dust seal carefully into the housing.
Greensmaster 3200/3200–D
SPECIAL
SCREW
Page 5 – 95
SPECIAL
SCREW
Figure 82
Figure 83
Hydraulic System