Toro Greensmaster 3200 Service Manual page 66

8. Remove fuel tank and hydraulic reservoir as fol-
lows:
A. Remove three cap screws (6) and two flat wash-
ers (14) securing tank mounting plate (13) to the
support bracket (28) and frame (Fig. 27).
B. Disconnect fuel hose (36) and expansion tank
hose (50) from the support bracket (14). Disconnect
fuel hose (35) from the number three fuel injector
(Fig. 28).
C. Disconnect expansion tank hose (25) from the
radiator elbow (26) (Fig. 26).
D. Disconnect hydraulic hose from welded fitting on
the tube leading into rear bulkhead (Fig. 31).
E. If the oil cooler is not installed, disconnect hy-
draulic hose from the hydraulic oil filter (Fig. 32).
F. Make sure cable ties and hose clamps securing
hoses to the frame and supports are removed.
G. Lift mounting plate and tanks from the machine.
9. Remove air cleaner as follows (Fig. 33):
A. Disconnect and remove hose leading from the
cleaner to the engine valve cover at the engine and
cleaner.
B. Disconnect hose leading to the radiator from the
cleaner.
C. Disconnect air cleaner bracket from the pump
mount. Remove air cleaner and bracket from the
machine.
Perkins Diesel Engine
2
1. Hydraulic hose
8
5
4
1. Hose (to engine)
2. Hose clamp
3. Air cleaner
4. Hose (to radiator)
Page 4 – 24
Figure 32
2. Hydraulic oil filter
6
2
2
Figure 33
5. Air cleaner bracket
6. Pump plate
7. Cap screw
8. Lock nut
Greensmaster 3200–D
1
7
1
3