UPS5000-E-(40 kVA-320 kVA)
User Manual
(1) Bypass
input PE
(5) Bypass
input N
(9) Mains input
L3
(13) Output V
(17) Battery
input N
Remove the cover before drilling holes. If you choose to route cables by drilling holes, paste grommet
strip to the hole edge to protect cables.
Issue 10 (2015-09-15)
Figure 3-24 Routing power cables through the cable tray covers at the top of the cabinet
(2) Bypass input L1
(6) Mains input PE
(10) Mains input N
(14) Output U
(18) Battery input
positive terminal
Drilling holes and routing cables
Based on site requirements such as the number of cables and cable size, you can drill
holes in the large cover in the middle of the cabinet top to accommodate the cables.
Table 3-3
shows how to route power cables that are recommended in
UPS5000-E-200K-F200.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(3) Bypass
(4) Bypass input L3
input L2
(7) Mains input
(8) Mains input L2
L1
(11) Output N
(12) Output W
(15) Output PE
(16) Battery input
negative terminal
3 Installation
Figure 3-25
for the
59