Connecting Ac Input Power Cables; Single Mains - Huawei UPS5000-E-12 User Manual

UPS5000-E-(40 kVA-320 kVA)
User Manual
----End

3.2.10 Connecting AC Input Power Cables

3.2.10.1 Single Mains

Context
Prepare OT terminals onsite. Strip the cable to expose the copper wire, which should be as
long as the part where the OT terminal is secured with the cable.
Procedure
Step 1 (Optional) Connect cables to the input PDC.
Step 2 Connect the wires of the AC input power cable to terminals L1, L2, L3, and N on the UPS
cabinet, as shown in
Figure 3-42
UPS5000-E-320K-F320T).
Issue 10 (2015-09-15)
For the connection method, see the PDC-0630ACV4INA Power Distribution Unit User Manual. If the
mains input and bypass input share a power source, mains and bypass input terminals are connected by
copper bars.
Figure 3-41
(for the UPS5000-E-320K-F320), and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(for the UPS5000-E-120K-F120/UPS5000-E-200K-F200),
Figure 3-43
3 Installation
(for the
73