UPS5000-E-(40 kVA-320 kVA)
User Manual
(5) Bypass input 2L1
----End
3.2.11 Connecting AC Output Power Cables
Prepare OT terminals onsite. Strip the cable to expose the copper wire, which should be as
long as the part where the OT terminal is secured with the cable.
Connect AC output power cables to the output terminals N, U, V, and W on the UPS cabinet,
as shown in
3-50
Figure 3-49 Output terminals (UPS5000-E-200K-F200/UPS5000-E-120K-F120)
(1) Output N
Issue 10 (2015-09-15)
(6) Bypass input 2L2
Figure 3-49
(for the UPS5000-E-120K-F120/UPS5000-E-200K-F200),
(for the UPS5000-E-320K-F320), and
(2) Output U
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(7) Bypass input 2L3
Figure 3-51
(for the UPS5000-E-320K-F320T).
(3) Output V
3 Installation
(8) Bypass input N
Figure
(4) Output W
79