Table of Contents
Advertisement
UPS5000-E-(40 kVA-320 kVA)
User Manual
Figure 5-47 Hibernation parameters on the WebUI
Step 3 On the WebUI, set Para. sys. hibernate to Enable, and click Submit. A security waning is
displayed, and click OK.
Step 4 Set the Module cycle hiber. period (days) parameter to an integer ranging from 0 to 100.
The default value is 30. If the value is 0, the hibernation period is 2 minutes. That is, the
module starts automatically after 2-minute hibernation.
----End
5.12 Setting Intelligent Mode
Context
Before you connect the D.G. to a UPS system, check that the system is a single UPS system
and that the system is working in non-inverter mode and has connected to batteries.
When the UPS is working, the D.G. starts if a main outage occurs and the battery voltage
reaches the specified threshold. To set intelligent mode on the LCD or WebUI, perform the
following steps:
5.12.1 LCD
Procedure
Step 1 On the main screen, tap System Info. and
Issue 10 (2015-09-15)
Click Submit after you set the parameter on the WebUI.
If you have not logged in, enter a user name and password, and tap
displayed
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
. The Settings screen is displayed.
5 Operations
on the login screen
184
Advertisement
Table of Contents
