Siemens ACUSON Antares Instructions For Use Manual page 125

Menu
Selection Tool Tip
Format Change display
format
Reset Reset Display
[ 1 ] I N S T R U C T I O N S F O R
Description
Selects a display format:
1:1—Displays the selected quadrant only, in full-
screen display format.
4:1—Displays all four quadrants on the screen.
2:1—Displays two quadrants on the screen:
Quadrant A (the acquisition plane) on the left and the
volume on the right.
1-3—Displays the volume on the left of the screen
and the other three quadrants on the right.
Adjusts the orientation of quadrants:
Center – On each slice, repositions the focal point to
the center of the quadrant.
Sync – Aligns slice and volume orientations. When
the selected quadrant is a slice, aligns the orientation
of the volume quadrant to that of the slice quadrant.
When the selected quadrant is the volume quadrant,
aligns the orientation of all slice quadrants to that of
the volume quadrant.
Note: If the VOI is displayed when you select a slice
quadrant and then select Sync, then the system
redefines the render direction as the selected slice.
Reset Orientation – Restores the default orientation
for all quadrants.
Reset All – Restores the default orientation and
display format for all quadrants; also restores the
default (or user defined) settings of other parameters
for all quadrants. User-defined settings are those that
were in effect when the current volume was first
displayed.
Flip—Reverses the render direction.
U S E
3 S y s t e m C o n t r o l s
Settings
1:1
4:1
2:1
1-3
Center
Sync
Reset
Orientation
Reset All
Flip
3 - 5 3