Table of Contents
Advertisement
4 S y s t e m S e t u p
Input/Output Panel Connections
Audio and video connections are located on the Input/Output (I/O) panel.
WARNING: Accessory equipment connected to the analog and digital
interfaces must be certified according to the respective EN and IEC standards
(for example, EN 60950 and IEC 60950 for data processing equipment and
EN 60601-1 and IEC 60601-1 for medical equipment). Furthermore, all
configurations shall comply with the system standards EN 60601-1-1 and
IEC 60601-1-1. Anyone who connects additional equipment to the signal input or
signal output port configures a medical system and is therefore responsible that
the system complies with the requirements of the system standards
EN 60601-1-1 and IEC 60601-1-1. Siemens can only guarantee the performance
and safety of the devices listed in the System Reference. If in doubt, consult the
Siemens service department or your local Siemens representative.
Caution: To ensure proper grounding and leakage current levels, it is the policy
of Siemens to have an authorized Siemens representative or approved third
party perform all on-board connections of documentation and storage devices
to the ultrasound system. The System Reference lists the peripheral devices
specified for use with the ultrasound system.
Input/Output connections.
4 - 2 2
System Reference
Accessories and
1
Left Audio Out to VCR
2
Right Audio Out to VCR
3
S-Video Out to VCR
4
Physio Trigger Out
5
Parallel port (printer)
6
System status LEDs
7
USB-A ports (printers):
J5B, J5A
8 Ethernet (Network)
9 VCR control
(RS-232 COM 1)
10 RGB/s video and limited
COM 2
11 Composite Video Out
12 S-Video In from VCR
13 Right (Channel 2) audio in
from VCR
14 Left (Channel 1) audio in
from VCR
15 USB-A port (modem), J1
[ 1 ]
I N S T R U C T I O N S
Options
Ch 2
F O R
U S E
Advertisement
Chapters
Table of Contents
