Connecting System Accessories; Front System Panel; Footswitch; Physio Cables - Siemens ACUSON Antares Instructions For Use Manual

Connecting System Accessories

The ultrasound system has connections for system accessories.

Front System Panel

Example of front system panel.

Footswitch

Attach the optional Footswitch connector into the corresponding socket
located on the front system panel.

Physio Cables

Attach the optional Physio leads and auxiliary connectors to the Physio
panel, located on the left front of the system.
The optional Physio feature allows the system to display a scrolling ECG
waveform on the image screen.
Note: The Physio inputs are Defibrillation Proof. However, in the event of defibrillation
while using the Physio function, the Physio inputs may become saturated (overloaded).
An ECG pattern may not be visible for up to 30 seconds. After this time, the Physio
function should return to normal operation.
To connect the Physio cables:
Connect the six-pin Physio cable to the socket labeled ECG on the front
of the system.
[ 1 ] I N S T R U C T I O N S F O R
1 PS2 Port (Barcode Connection)
2 USB-A Connection
3 Footswitch Connection
4 Headphone Connection
5 LED for Microphone
6 Microphone Connection
7 On/Off Switch
8 LED for On/Off Switch
U S E
4 S y s t e m S e t u p
Physio label identifying
the connector socket.
4 - 2 1