Table of Contents
Advertisement
4 S y s t e m S e t u p
Transducer Cable Management
Use the transducer cable hooks to manage one or more transducer cables.
The transducer cable hooks support your cables and protect them from
contact with the floor.
To install a transducer cable hook:
Note: A transducer cable hook can mount on any transducer holder. A transducer cable
hook cannot mount on a gel holder.
The transducer cable hook mounts between the transducer holder and the
point of attachment on the ultrasound system.
1. Remove the transducer holder from the ultrasound system:
Reach under the holder to locate the tab on the holder. The tab extends
below the point of attachment to the ultrasound system. Squeeze the
tab towards the holder and pull the holder downward.
2. Attach the transducer cable hook to the transducer holder:
Note: Ensure that the cable hook is oriented toward the cup side of the transducer
holder before mounting the transducer holder onto the ultrasound system.
a. Align the widest part of the open area on the cable hook with the
support on the transducer holder.
b. Slide the cable hook downwards over the transducer holder support,
engaging the cable hook onto the transducer holder.
3. Reattach the transducer holder to the system:
Align the support on the holder directly below the point of attachment
on the ultrasound system and firmly push upwards until the holder
snaps into place.
4 - 2 0
[1] Instructions for Use
Transducer
Holders
Transducer cable hook.
[ 1 ]
I N S T R U C T I O N S
F O R
4-19
U S E
Advertisement
Chapters
Table of Contents
