Optional) Configuring Cloud Service Access - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide
2.
----End

7.8.3 (Optional) Configuring Cloud Service Access

Context
●
●
Procedure
Step 1 Complete the first startup password authentication. The Cloud service access
page is displayed.
Step 2 Set Cloud service access from Disable to Enable.
Step 3 Set the Cloud service access mode. The default value is 4G. You can select FE
from the drop-down list box.
Issue 02 (2022-07-18)
NO TE
– The preset password is Changeme. The password is valid only after you hold down
the button for the first time to enable the WiFi function. If you enable the WiFi
function on the WebUI, there is no preset password.
– After the WiFi function is enabled, the password for a mobile phone to connect to
the WiFi network is Changeme. When you log in to the app using the PAD, the
system prompts you to change the preset password.
– After you disable the WiFi hotspot function on the WebUI and press the button
again, the WiFi function is still enabled. In this case, the WiFi password is the one
you changed into last time.
– The WiFi function is disabled by default. When you enable the WiFi function,
change the WiFi password to ensure connection security.
– A password that has been used for a long time is more likely to be stolen or
cracked. The risk increases over time. Change the WiFi password periodically
(recommended: once half a year).
Use the Service Expert app to authenticate the startup password.
a. Open the app, and log in as an administrator.
Ensure that the IP address is 192.168.245.10, the default administrator
name is admin, and the preset password is Changeme.
b. If the message displayed on the page is changed from Initial startup
password authentication to Activated, the startup password
authentication is complete.
NO TE
– After the first login, change the preset password in time to ensure system access
security.
– A password that has been used for a long time is more likely to be stolen or cracked.
The risk increases over time. Change the password once every three months.
– It is recommended that you use different user accounts to log in to the ECC800-Pro
WebUI and app concurrently. Otherwise, either of them will be logged out.
– The iDCService app supports only the Android system.
– The iDCService app is available only in Chinese.
The cloud authorization has been signed on the Service Expert app.
The initial startup password has been authenticated.
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 FAQ
95