Ecc800 Webui Operations; Setting The Date And Time; Adding A Device - Huawei FusionPower6000 Maintenance Manual

FusionPower6000
Maintenance Guide
No.
3
4

7.9 ECC800 WebUI Operations

7.9.1 Setting the Date and Time

Procedure
Step 1 Choose System Settings > System Parameters > Time.
Step 2 Set the time zone, date, and time, or click Obtain Local Time. Then, click Submit.
Step 3 (Optional) If you want to use the NTP server for time synchronization, select NTP
server sync. Set NTP primary server IP, Whether the NTP master server is
authenticated, Key ID, and Key, and click Test to check whether the test is
successful. Set NTP backup server IP, Whether the NTP backup server is
authenticated, Key ID, and Key, and click Test to check whether the test is
successful. Enter Port number and Sync interval (min), and click Submit.
----End

7.9.2 Adding a Device

Step 1 Choose System Settings > Device Management > Add Device.
Step 2 After a device is added, the details about the device connected to the
FusionPower6000 are displayed.
Figure 7-19 Adding a device
Issue 02 (2022-07-18)
Task Description
Connecting Before using the EDCM
to devices service to manage devices,
(using the you need to connect
app, devices to the network.
recommend
ed)
Connecting
to devices
(using the
web client)
Copyright © Huawei Digital Power Technologies Co., Ltd.
Operation Guide
7 FAQ
109