FusionPower6000
Maintenance Guide
Figure 7-24 S-ECO mode parameters 2
Figure 7-25 S-ECO mode parameters 3
Step 3 (Optional) If you set S-ECO mode in bypass mode, manually start the UPS
inverter.
After the inverter is started, the UPS still supplies power through the bypass, and
the inverter is standby. When the bypass is abnormal, the UPS transfers to inverter
mode immediately. If the inverter is not started, the UPS stops supplying power
when the bypass is abnormal, and the system may power off.
Figure 7-26 S-ECO system status (VFI)
Issue 02 (2022-07-18)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 FAQ
119