NEC NEAX 7400 ICS Installation Manual page 36

NAP- 200-003
Sheet 4/29
Installation of Main Equipment
(3) Connect the PIM to the RACK PARTS as shown in Figure 003-4 using the 4 screws provided with the RACK
PARTS.
When the system is a multiple-PIM configuration, connect all PIM and RACK PARTS.
Ensure that the PIM's are bolted together as shown in Figure 003-5.
REAR
Note: The BATTM and/or the MDFM can be installed the same as the PIM.
Figure 003-4 Connection of the PIM and the RACK PARTS
CHAPTER 3
Page 22
Revision 1.0.1
(x3)
AD-25182501
BASE
(x4)
PIM
Note