Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
Figure 9-22 Removing the T/H sensor
Step 3 Install a new T/H sensor and reconnect the cable.
Before installing the new T/H sensor, check that its DIP switch settings are
consistent with the DIP switch settings of the old T/H sensor.
Step 4 Reinstall the cover on the T/H sensor.
Step 5 Power on the device and tap Start on the home screen. Ensure that the device is
running normally without any alarms.
----End
9.18 Replacing a Wet Film Humidifier
Context
Tool: Phillips screwdriver
Procedure
Step 1 Choose Settings > System Settings > System Control and choose Humidifying
function > Disable.
Step 2 Open the maintenance door and enter the device.
Step 3 Remove the water inlet pipe from the wet film humidifier.
Step 4 Remove the sheet metal using a Phillips screwdriver and take out the above sheet
metals.
Issue 04 (2022-06-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
9 Parts Replacement
154
Advertisement
Table of Contents
