FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
Step 5 Pull out the wet film humidifier from the top.
Figure 9-23 Removing a wet film humidifier
Step 6 Reinstall the wet film humidifier by performing the preceding steps in reverse
order.
After replacing the wet film humidifier, properly install and secure the humidifier
water inlet pipe. Otherwise, the pipe may leak.
Step 7 On the home screen, choose Maint > Wizard Startup and commission the wet
film humidifier to check that the humidifier is normal. Then exit from the wizard
startup mode.
Step 8 On the home screen, choose Maint > Performance Maint to enter the
Performance Maint screen, and clear the runtime of the wet film humidifier.
Step 9 Choose Settings > System Settings > System Control > Humidifying function >
Enable.
----End
Issue 04 (2022-06-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
9 Parts Replacement
155