The following operations can be performed in addition to the device station parameter setting. For the details of the window,
click [Help].
• Reading and writing parameters from/to MR-J5(W)-G during data link (online)
• Saving parameters of MR-J5(W)-G in a separate file/reading them from the saved file
Once the setting is complete, click [Project] [Exit MR Configurator2] or the close button on the top right to close the
"Parameter Setting" window.
For other than MR-J5(W)-G
Navigation window "Parameter" "Module Information" Target module "Basic Settings" "Module Parameter
(Network)" "Network Configuration Settings" <Detailed Setting>
In this manual, "Slave station" is written as "Device station".
Select and right-click the device station, and select "Parameter of Device Station" to display the "Parameter of Device Station"
window.
In this manual, "Slave station" is written as "Device station".
2 PARAMETER SETTINGS
2.5 "CC-Link IE TSN Configuration" Window
2
121