Mitsubishi Electric MELSEC iQ-R Series User Manual page 65

■ Settings on the engineering tool side
Set in the "Specify Connection Destination Connection" window.
[Online]  [Current Connection Destination]
1.
Set "PC side I/F" to "Ethernet Board".
2.
Double-click "Ethernet Board", and open the "PC side I/F
Detailed Setting of Ethernet Board" window.
3.
Set the network No., station No., and protocol of the
personal computer.
TCP: A connection is established during communication.
Since data is exchanged while checking that the data has
correctly reached the communication destination, the data
reliability can be ensured. Note that the line load is larger
than UDP/IP communications.
UDP: Since a connection is not established during
communication and whether the communication
destination has correctly received the data is not checked,
the line load is lower. Note that the data reliability is lower
than TCP/IP communications.
4.
Set the "PLC side I/F" to the module to be connected.
5.
Double-click the icon set in step 4, and open the detailed
setting window.
6.
Select "Connection via HUB" for the connection method,
and enter the station No. and IP address or host name of
the Motion module.
7.
Specify "Other Station Setting" or "Network
Communication Route" if necessary.
1 FUNCTIONS
1.3 Ethernet Connection
1
63