Installing A Replacement Lcc - Dell PowerStore 1000 Installation And Service Manual

b. Press the orange handle buttons to release the LCC, pull the latches outward, and remove the LCC from its slot.
Figure 160. Removing an LCC
4. Place the LCC on a clean, static-free surface.

Installing a replacement LCC

Steps
1. Attach an ESD wristband to your wrist and the enclosure.
2. Pull out the latches on the LCC and make sure they stay in the open position.
3. Align the LCC with the enclosure opening and gently push the LCC straight into the enclosure, being sure the LCC is
completely seated in the enclosure.
132 SAS expansion enclosure service procedures
1
2
CL5984